QA Specialist Sr./Lead (HR-5757)

Job Code:       QA09

Grade Level:   10 (Exempt)

Job Code:       QA07

Grade Level:   12(Exempt)

PER FPB Policy FBP-HR-PRO-00001: Internal employees must be in current position for (1) year or greater to be eligible to apply.

Position Overview

Under general supervision, performs quality assurance support for the Quality Assurance (QA) team. Typical job duties are routine and require use of standard techniques and procedures.

§  Responsible for planning and preparation of quality assurance documents and procedures and assisting all levels of project personnel in quality related matters

§  Performs surveillance and inspections in accordance with site or department procedure. Provides the results of these assessments and proposed corrective actions, if needed, to line management

§  Inspects material and equipment for compliance to purchase order specification and applicable quality requirements

§  Assists project management in developing an orientation program to ensure project teams are familiar with the requirements of the Project Quality Plan

§  Liaison with individuals and units within or outside division or project structures

§  Decision making authority and recommendations which have a significant impact on project quality policies and programs

§  Serves as the project QA representative on medium to large projects as assigned

§  Prepares project audit schedules, discipline activity plans for the QA function, and audit reports (internal and external), noting nonconformance’s and verifying effective corrective action

§  Acts as lead quality auditor, and follows up on audit findings and corrective actions

§  Responsible for technical and administrative functions (e.g., planning, organizing, interpreting, coordinating, and executing division and project assignments)

§  Provides mentoring/people development for direct reports

§  Provides assigned technical, administrative or functional support to the management team

§  Responsible for providing technical and administrative direction to direct reports

§  Responsible for planning and execution of a wide variety of technical and administrative assignments

§  Assists in the maintenance of project QA/PA records for all phases of the project

§  Performs duties complex in nature

§  Other job related duties as assigned

§  Maintains knowledge of and demonstrates ability to perform work safely in accordance with all approved safety policies, procedures and applicable regulations and performs assigned duties in a

§  safe manner

§  Actively participates in Safety Work Groups

Working Conditions - Inside

Work in an office at a normal environmental restoration atmosphere (outdated and/or abandoned facilities or industrial field environments). May also work at off-project sites representing the organization at various types of locations throughout the community for business purposes. Potential exposure to equipment movement hazards, dangerous chemicals/solvents or hazardous and radioactive materials if proper safety procedures are not followed.

Ability to perform sedentary to light work, exerting up to 50 pounds of force occasionally (any exertion of force/lifting greater than 45 pounds requires usage of a two person “buddy system”), non-repetitive, up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly, repetitive; performing such activities as lifting, lowering, carrying, pushing, pulling, standing, walking, grasping, kneeling, stooping, reaching.

Ability to perform primary office duties including heavy computer usage.

Radiological training shall be required.

The statements above are intended to describe the general nature and level of work being performed by the person assigned to this position. Principal duties and responsibilities are intended to describe the overall purpose of this job

This job description does not state or imply that the above are the only duties and responsibilities assigned to this position.  Employees holding this position will be required to perform job-related duties as requested by management. All requirements are subject to modification to reasonably accommodate individuals with a disability.

Working Conditions - Outside

Work in an environmental restoration atmosphere (outdated and/or abandoned facilities). Potential exposure to equipment movement hazards, dangerous chemicals/solvents or hazardous and radioactive materials if proper safety procedures are not followed.

Ability to wear respirator and other protective equipment to enter various types of potentially hazardous areas (such as but not limited to chemical, dust fumes, mists, heat stress factors, etc.).

Ability to carry several instruments/equipment or tools while walking extensively. Potential prolonged walking/standing, repeated pushing/pulling.

Ability to perform medium to very heavy work, exerting up to 100 pounds of force occasionally, non-repetitive, up to 50 pounds of force frequently (any exertion of force/lifting greater than 45 pounds requires usage of a two person “buddy system”), and/or more than 20 pounds of force constantly, repetitive; performing such activities as lifting, lowering, carrying, pushing, pulling, standing, walking, grasping, kneeling, stooping, reaching.

Potential for prolonged driving of or riding in a motor vehicle, machine operation, and/or working around moving equipment/machinery or motorized vehicles (such as but not limited to car, truck, golf cart, gator, heavy equipment).

Ability to work in confined areas, tanks, heat stress conditions, high noise and areas with radiation and chemical hazards.

Environmental conditions may include weather or temperature extremes, inclement weather (such as but not limited to wind, rain, excessive heat, excessive cold, snow/ice, etc.)

May be required to operate company vehicle during the course of work. All safety and DOT regulations and procedures must be adhered to at all times.

The statements above are intended to describe the general nature and level of work being performed by the person assigned to this position.  Principal duties and responsibilities are intended to describe the overall purpose of this job.

This job description does not state or imply that the above are the only duties and responsibilities assigned to this position.  Employees holding this position will be required to perform job-related duties as requested by management. All requirements are subject to modification to reasonably accommodate individuals with a disability.

Required Contingencies:

·         Pre-Employment Physical (office or field work)

·         Drug Screen

·         The ability to obtain/maintain "L" or "Q" Clearance one year from hire date

·         Background Check

·         Any site required training

Prospective employees must be available to start work with Fluor-BWXT Portsmouth LLC within a reasonable time frame after acceptance of FBP’s offer of employment (typically 30 days or less).

Applicants for employment can initiate a request for accommodation or obtain information concerning accommodations if contacted by the Company for an Interview.

As a reminder, all internal employees of Fluor-BWXT Portsmouth LLC must submit a current resume.  External candidates must also submit a current resume.

Fluor-BWXT Portsmouth LLC is an equal opportunity employer that recognizes the value of a diverse workforce.  All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability, and/or protected veteran status in accordance with governing law. 

Department of Energy (DOE) Order 426 QA Technician Qualifications apply (High School/GED, 1 years job-related experience)

Strong interpersonal/communication skills

Strong PC skills including Microsoft applications

Detail oriented

Job Code:       QA09

Grade Level:   10 (Exempt)

Minimum Requirements

High School Diploma/GED and 6 years of related experience, or an equivalent combination of education and experience is required.  Typical experience ranges from 6 - 10 years. 

Job Code:       QA07

Grade Level:   12(Exempt)

Minimum Requirements

BA/BS degree in a related field and 9 years of related experience, or an equivalent combination of education and experience is required.  Typical experience ranges from 9 - 12 years.

Additional Requirements:

Coordinate Measurement Machine (CMM) experience preferred.

Experience in Non-Destructive Testing such as ultrasonic thickness, magnetic particle, liquid penetrant is preferred.

Experience in welding and visual inspections, Certified Weld Inspector is a plus.

Experience with inspection of mobile equipment and/or cranes is preferred.

Experience in mechanical maintenance is a plus

1. Have the ability to use precision measuring equipment, including micrometers, calipers, and bevel protractors.
2. Read and interpret mechanical drawings. 
3. Mechanical background such as pipe fitter, maintenance mechanic, boiler maker, and machinist.
4. Familiar with rigging as a qualified rigger or inspector
5. Preferred professional certifications Certified welding inspector, ASNT Level II MT, PT, VT, UT, Overhead crane inspector.